8700 PrecisionCut Fairway Mower

No matter how devilishly difficult the fairway layout, the top-of-the-line 8700 PrecisonCut can tackle it. After all, with a turbo-charged, intercooled diesel engine, QA7 cutting units, available GRIP all-wheel drive and built-in benefits like a double-acting steering cylinder, it’s more than a match for whatever course architects dream up.

Type Yanmar
Horsepower ---
Maximum rated horsepower, hp (kW) 43.1 (32.2 kW) @ 2600 rpm - *Engine hp is provided by engine mfr for comparison purposes only. Actual operating hp will be less.
Cylinders 3
Displacement, cu. in. (cc) 91.3 (1496)
Air cleaner 2-stage dry element
Fuel Diesel
Cooling system Liquid centrifugal pump
Traction drive Servo-controlled hydrostatic pump to wheel motors; optional GRIP All Wheel Drive Traction System
Reel drive pump Tandem gear pump
Hydraulic system capacity, U.S. gal. (l) 12 (45.4)
Fuel tank capacity, U.S. gal. (l) 18 (66.6)
Steering Hydraulic power with double-acting steering cylinder
Front drive tires 26.5x14-12 turf
Steering tires 20x10-8 turf
Ground pressure, psi 10
Brakes Disc and dynamic braking through closed loop hydrostatic system
ROPS Standard; meets pending ISO 21299 Standard
Operating weight wet, full fuel, less operator, lb. kg)  
8-Blade ESP cutting units lowered 2485 lbs (1127 kg)
Throttle Hand throttle at operator's right
Forward/reverse 2-pedal
Mower lift One-touch single handle
Parking brake Foot pedal lock for foot operated parking brake
Seat Deluxe suspension
PTO Hand lever located on command arm
4WD (Optional) GRIP All Wheel Drive Traction System; when installed AWD in mow and transport; hydraulic flow links opposite side wheel motors together for excellent grip on slopes
Tilt steering Foot operated
Height with ROPS, in. (cm) 85 (216)
Length with catchers, in. (cm) 115 (292)
Transport width, in. (cm) 87 (221)
Mowing position width, in. (cm) 116 (295)
Ground speed ---
Mowing, mph (km/h) 0 to 8.0 (0 to 12.8)
Transport, mph (km/h) 0 to 12.5 (0 to 20.12)
Reverse, mph (km/h) 0 to 5.0 (0 to 6.4)
Number 5
Size, in. (cm) 22 (55.9)
Total width of cut, in. (cm) 100 (254)
Height of cut ---
10-blade ESP, in. (mm) 0.25 to 3 (6.4 to 76.2)
8-blade ESP, in. (mm) 0.375 to 3 (9.5 to 76.2)
5-blade ESP, in. (mm) 0.75 to 3 (19.0 to 76.2)
Frequency of clip (FOC) ---
10-blade ESP, in./mph (mm/km/h) 0.067 (1.70)
8-blade ESP, in./mph (mm/km/h) 0.084 (2.14)
5-blade ESP, in./mph (mm/km/h) 0.134 (3.41)
Rollers, in. (mm) 3 (7.6)
Reel diameter (ESP cutting unit), in. (cm) 7 (17.8)
Type Two-year limited
Type CE and ANSI B71.4-2004
Specifications are based on published information at the time of publication.Specifications are subject to change without notice.