Gator TX Turf Utility Vehicle


Step up to the enhanced Gator TX Turf and you’ll appreciate a deluxe cargo box that includes 16.4cubic feet of capacity, pick-up style tailgate, 20tie-down points, a gas-assist shock for easier lifting and dumping, and the ability to convert to a fl at-bedmode in minutes by removing the composite side panels and tailgate.

Engine (shield removed for illustration)

The Gator™ TX Turf is powered by a 13-hp*, 401-cm3, single-cylinder, four-cycle gas engine.

*The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.

  • Overhead valve design for greater efficiency and fuel economy
  • Full-pressure lubrication system with a replaceable filter
  • Replaceable single-element air cleaner with remote intake
  • Large-capacity muffler for low sound levels
  • Pedal start, which provides the ultimate in operator convenience
  • Electronic ignition switch, which allows pedal start and provides reliable starts and less servicing
  • Low fuel consumption and a large 5 U.S. gallon (18.9 L) fuel tank reduce fueling frequency; consumption at half load and average speed is 0.35 U.S. gph (1.3 L/h)
Spesifikasi: 
Key Specifications  
Engine and Electrical Make Kawasaki
Brakes Type All-wheel hydraulic disk
Tires Front Two 22x9.50-10, 4PR
Dimensions Seating Capacity 2
Cargo Box Length, in. (mm) 45 (1143)
Fuel System Capacity, U.S. gal. (L) 5 (18.9)
Suspension and Steering Front Independent, spring over shock, single A-Arm
Transmission Type Continuously variable transmission (CVT)
Ground Pressure With 200 lb. Operator Only 6.2 psi (0.44 kg/cm2) front, 11.6 psi (.82 kg/cm2) rear
Machine Other standard features Two cup holders, glove box, hour meter, fuel gauge, 12V DC outlet, rear hitch
Engine and Electrical  
Make Kawasaki
Type 4 cycle gas
Cylinders 1
Cooling Air
Valving Overhead valves
Displacement 401 cc (24.5 cu. in.)
Ignition Solid State 12V
Lubrication Full pressure
Oil Filter Spin-on
RPM, idle (no load) N/A
RPM, fast (no load) 2800 engine rpm @ governed speed
Air Cleaner Dry replaceable single element w/intake
Maximum Torque 19.5 lb-ft @ 2400 rpm
Battery 38 amp/hr, 340 cca
External Starter Generator 30 amp @ governed speed
Alternator ---
Headlights Two 37.5 watt halogen
Muffler High volume
Brakes  
Type All-wheel hydraulic disk
Park Brake Rear mechanical disk (hand-operated)
Tires  
Front Two 22x9.50-10, 4PR
Rear Two 24x12-10, 4PR
Available tread types Turf/hard surface
Weight  
Dry, lb. (kg) ---
Including fuel/fluids, lb. (kg) 1105 (501)
Dimensions  
Seating Capacity 2
Seat Type Professional High back, bucket (tilt forward)
Seat adjustment Optional
Height, in. (mm) 47.6 (1209)
Width, in. (mm) 60 (1525)
Length ---
Without Bumper, in. (mm) 109.6 (2783)
With Bumper, in. (mm) 112.1 (2847)
Ground Clearance ---
Under Transaxle, in. (mm) 5.7 (145)
Under Foot Platform, in. (mm) 10.6 (270)
Front Tread Centers, in. (mm) 50 (1270)
Rear Tread Centers, in. (mm) 48 (1219.3)
Wheelbase, in. (mm) 76.5 (1943)
Turning Clearance Circle, ft. (m) 12 (3.65)
Payload Capacity, lb. (kg) 1000 (454)
Towing Capacity, lb. (kg) 1000 (454)
Cargo Box  
Length, in. (mm) 45 (1143)
Width, in. (mm) 52 (1321) inside
Depth, in. (mm) 12 (304.8)
Capacity, lb. (kg) 600 (272)
Volume, cu. ft. (m3) 16.4 (0.46)
Height above ground, in. (mm) 30 (762)
Material Polypropylene side panels and tailgate; steel floor and load guard
Dump Manual, power lift (optional)
Tailgate Hinged at bottom, removable; side panels are removable
Fuel System  
Capacity, U.S. gal. (L) 5 (18.9)
Consumption (approx.) ---
At Half Load and Average Speed, U.S. gal./hr. (l/h) .35 (1.32)
Suspension and Steering  
Front Independent, spring over shock, single A-Arm
Total travel 5 in. (127 mm)
Rear Semi-independent adjustable coil over shock (COS)
Total travel 3 in. (76.2 mm)
Steering Rack and pinion
Transmission  
Type Continuously variable transmission (CVT)
Speed 0-15.5 mph (0-25 km/h) forward, 0-15.0 mph (0-24.1 km/h) reverse
Drive belt Spun top cog, 31.6 mm wide
Overall Reduction Ratio ---
Low 17.79:1 Trans. forward
High 18.34:1 Trans. reverse
Bearings Sealed bearings throughout
Axle 1 5/16 in. (33.5 mm) diameter forged, splined shaft
Differential Lock N/A
Drive Chain N/A
Transaxle Fully enclosed, oil bath
Gear Selection Forward, neutral, reverse
Ground Pressure  
With 200 lb. Operator Only 6.2 psi (0.44 kg/cm2) front, 11.6 psi (.82 kg/cm2) rear
Fully Loaded Vehicle ---
Machine  
Other standard features Two cup holders, glove box, hour meter, fuel gauge, 12V DC outlet, rear hitch
Fender and hood material TPO - Thermal Plastic Olifen (rubber and polypropylene)
Certification SAE J2258-2003, ASME B56.8a-1994
Specifications are based on published information at the time of publication.Specifications are subject to change without notice.