8800 TerrainCut Rough Mower


No rotary rough mower in this class makes it as easy to adjust height-of-cut. Compare for yourself, and you’ll see why. On the 8800, you simply flip levers to raise and lower the front and rear rollers, and flip them back to lock in a new height-of-cut. There’s no need for special tools, or complicated requirement to brace the deck chamber.

Spesifikasi: 
Key Specifications  
Engine Type Yanmar
Vehicle Traction type Servo-controlled hydrostatic pump to 4 wheel motors with standard GRIP All Wheel Drive Traction Sys.
Controls Throttle Hand control on operator control console
Dimensions Height with ROPS, in. (m) 84.25 (2.4)
Cutting deck width, in. (cm) 21 (53.3)
Sound levels Operator ear full engine rpm, dB(A) 89 dB(A)
Warranty Type Two-year limited
Certification Type CE and ANSI B71.4
Engine  
Type Yanmar
Maximum rated horsepower (kW) 42 hp (31.1 kW) @ 2600 rpm - * Engine hp is provided by engine mfr. for comparison purposes only.
Cylinders 3
Air cleaner 2-stage dry element
Fuel Diesel
Cooling system Liquid centrifugal pump
Vehicle  
Traction type Servo-controlled hydrostatic pump to 4 wheel motors with standard GRIP All Wheel Drive Traction Sys.
Deck drive pump Tandem gear pump
Deck drive Direct-coupled hydraulic gear motor
Hydrostatic system capacity, U.S. gal. (L) 12 (45.4)
Fuel tank capacity, U.S. gal. (L) 18 (68.1)
Steering Hydraulic power with dual rod, double acting steering cylinder
Steering tires 20x10-8 turf
Front drive tires 26x12-12 Turf Trac R/S
Ground pressure 12 psi
Brakes Disc and dynamic braking through closed loop hydrostatic system
Operating Weight Wet (cutting units raised), lb. (kg) 3,097 (1,405)
Options available Cruise control; mulch kit; canopy
Controls  
Throttle Hand control on operator control console
Forward/reverse Dual pedal
Mower lift Single hand lever located on operator control arm
Parking brake Foot pedal lock for foot operated park brake
Seat Deluxe suspension
PTO Hand lever located on command arm
Brakes Turning brakes not needed due to GRIP All Wheel Drive Traction System
4WA Standard GRIP All Wheel Drive Traction System; always engaged in mow or transport
ROPS Standard, meets pending ISO 21299 standards
Tilt steering Foot operated
Dimensions  
Height with ROPS, in. (m) 84.25 (2.4)
Length, in. (m) 125.98 (3.7)
Transport width, in. (m) 85.83 (2.18)
Mowing width, in. (m) 88 (2.23)
Ground speeds ---
Mowing, mph (km/h) 0 to 8.0 (0 to 12.8)
Transport, mph (km/h) 0 to 12.5 (0 to 20.12)
Reverse, mph (km/h) 0 to 5 (0 to 8.0)
Cutting Units  
Cutting deck width, in. (cm) 21 (53.3)
Height of cut range, in. (cm) 1 to 4 (2.54 to 10.2)
Deck construction 10-gauge steel
Blade tip speed, ft./min. 15000
Rear roller diameter, in. (cm) 3 (7.6)
Front rollers, in. (cm) (2) 4-in (10.2 cm) diameter by 5-in (12.7 cm) wide
Sound Levels  
Operator ear ---
Measuring standard ---
Attachments installed ---
Operator ear full engine rpm, dB(A) 89 dB(A)
Operator ear reduced engine rpm (2300 rpm), dB(A) N/A
Measuring standard ISO 11201
Attachments installed N/A
Warranty  
Type Two-year limited
Certification  
Type CE and ANSI B71.4
Specifications are based on published information at the time of publication.Specifications are subject to change without notice.