2500E Triplex Hybrid Riding Green Mower

Gentle on the green, precise on the cut. Take advantage of the industry's lowest ground pressure and patented offset cutting units.

Type Yanmar IDI Diesel TNV70-XJGM
Engine horsepower 19.6 hp (14.6 kW) per SAE J1995 @ 3000 rpm - * Engine hp is provided by engine mfr. for comparison purposes only. Actual operating hp will be less.
Air cleaner Semi-cyclone, dry-type, dual-stage
Cooling Liquid
Oil filter Full-flow filter
Engine oil capacity 3.1 US qt (2.6 L)
Pressurized lubrication system Standard
Number of cylinders 3-cylinder
Displacement 784 cc
Charging system Flywheel, alternator
Alternator capacity 20 amp
Ignition ---
Battery type 12-volt, BCI group 40 maintenance free
Starter Electric (solenoid shift)
Wheels and tires ---
Front 18x10.5-10, 2-ply smooth; 20x10-10, 2-ply smooth; or 20x10-10, 2-ply turf tread
Rear 18x10.5-10, 2-ply smooth; 20x10-10, 2-ply smooth; or 20x10-10, 2-ply turf tread
Brakes Single pedal, 2-wheel disc brakes
Type Dual 6-in (15.2 cm)
Mowing speed, mph (km/h) 0 to 4 mph (0 to 6.4 km/hr)
Transport speed, mph (km/h) 0 to 8.5 mph (0 to 13.7 km/hr)
Reverse speed, mph (km/h) 0 to 3 mph (0 to 4.8 km/hr)
Ground clearance with catcher, in. (cm) 4-in (10.2 cm)
Fuel tank capacity, U.S. gal. (L) 7.9 US gal (29.9 L) in a single tank
Muffler Horizontal discharge below frame
Hydrostatic capacity (total), U.S. gal. (L) 7.6 US gal (28.8 L)
Hydrostatic reservoir capacity (only), U.S. gal. (L) 5.4 US gal (20.4 L)
Ground drive, reel drive ---
Traction drive Hydrostatic, 2-pedal control
Reel drive Electric
Reel power source Alternator, 48 Volt / 90 amp
Reel control Voltage regulated
Hydraulic filtration 10 micron
Filtration ---
Number 3- Offset design
Size, in. (cm) 22-in (55.9 cm) floating, standard
Backlapping Standard on machine, variable adjustment capability
Clip frequency, in./mph (mm/km/h) 0.045-in/mph (0.71 mm/km/hr) with 11-blade reel; 0.072-in/mph (1.14 mm/km/hr) with 7-blade reel
Front rollers Optional 2-in (5.1 cm) smooth, machine grooved, or spiral
Reel diameter, in. (cm) 5-in (12.7 cm)
Bedknife adjustment Bedknife-to-reel
Height-of-cut, in. (mm) 5/64 to 3/4-in (2.0 to 19.0 mm) with 2-in (5.1 cm) front roller; or 5/8 to 1.25-in (16 to 32 mm) with 3-in (5.1 cm) front roller
Number of blades Choice of 7 or 11
Mower lift (1) Hydraulic cylinder for front two units, (1) hydraulic cylinder for center unit
Steering Hydraulic, adjustable column
Reel lift Right hand (optional foot controls)
Throttle Right hand
Park brake Right foot
Reel drive Right hand
Glow plug switch and indicator light Automatic, on instrument panel
Hydrostatic speed ---
Forward Right foot
Reverse Right foot
Ignition Key start and shutoff
Engine oil pressure LED Warning light
Alternator LED Warning Light
Hydraulic oil temperature LED Warning Light
Engine coolant temperature LED Warning Light
Hourmeter Digital
Diagnostics On-board diagnostics with White Box Controller and (SOS) Sit on Seat Diagnostics
Safety interlocks Operator presence switch (in seat), backlap switch, mow/transport switch, park brake set switch
Number ANSI B71.4-2004
ROPS 2-Post SAE J21294 Roll Over Protection Structure with Seat Belts meets pending ISO 21299 standards
Engine Yanmar engine meets EPA Tier 2, Interim Tier 4, and Tier 4
Wheelbase, in. (cm) 51.0-in (129.5 cm)
Tread width, in. (cm) 40.0-in (101.5 cm)
Mowing position width, in. (cm) 62.0-in (157.5 cm)
Turning radius uncut circle, in. (cm) 18-in (45.7 cm)
Weight (full fluids, no operator or fuel), lb. (kg) 1,453 lbs (659 kg)
Full engine rpm ---
With GTC and power brush attachments 87 db(A)
With 11/7 blade cutting units and no attachments 83 db(A)
Reduced engine rpm (2250) ---
With GTC and power brush attachments 81 db(A)
With 11/7 blade cutting units, no attachments 79 db(A)
Specifications are based on published information at the time of publication.Specifications are subject to change without notice.