220 E-Cut Hybrid Walk Greens Mower

With a fully contouring head, the 220 E-Cut Hybrid can easily follow the most severe undulations. Limit chains control how much the cutting unit contours and the amount of rear roller drop when unit is lifted during a turn so you can easily adjust contouring for your greens.

Type Honda, air cooled, GX120
Cycle Four
Bore and stroke, in. (mm) 2.36 x 1.73 (60 x 44)
Piston displacement, cc 118
Compression ratio 8:05:01
Horsepower, hp (kW) 3.5 (2.6) - * Engine hp is provided by engine mfr for comparison purposes only. Actual operating hp will be less.
Direction of rotation of output shaft Counterclockwise viewed from shaft side
Inclination limit Tilted up to 20 degrees in any direction
Idle speed at output shaft, rpm 1300
Maximum speed at output shaft, rpm 3100
Type Regular-grade unleaded or leaded gasoline
Tank capacity, U.S. qt (L) 2.7 (2.5)
Type SAE 30 or SAE 10W-30
Capacity, U.S. qt (L) 0.6 (0.57)
Differential drive capacity, U.S. qt (L) 0.7 (0.35)
Cutting equipment  
Cutting width 22-in. (55.9-cm) QA5 cutting unit
Cutting height (minimum), in. (cm) ---
Standard - 3.0-mm bedknife, in. (mm) 0.125 (3.2)
Optional - 2.5-mm bedknife, in. (mm) 0.110 (2.8)
Optional - 2.0-mm bedknife, in. (mm) 0.078 (2.0)
Optional - tee bedknife, in. (mm) N/A
Frequency of clip standard, in. (mm) Variable with five settings: 0.162, 0.180, 0.220, 0.380, 0.480 (4.11, 4.57, 5.59, 9.65, 12.1)
Diameter, in. (mm) 5 (127)
Number of blades 11
Material Heat-treated chromium molydenum steel
Bedknife - standard, in. (mm) 0.118 (3.0) thick x 22 (560) long
Optional rotary brush and Greens Tender™ Conditioner (GTC)  
Brush Interlocked with reel, rotation in reverse direction; 2-3/8-in. (60-mm) diameter nylon
GTC cutter blades Specially hardened carbon tool steel; star-shaped; 2-3/8-in (60 mm) diameter, 75 blades
Adjustable brush or cutter height, in. (mm) 1/32 (0.79) below height of cut
Gear drive Gear driven from reel shaft, opposite direction of reel, rotation powers brush or greens tender conditioner
Grass catcher  
Size, lb (kg) 7 (3.2)
Type Polyethylene
Transport Belt tension
Reel jaw-type clutch On / off
Brush/GTC jaw-type clutch On / off
Traction drum Dual, aluminum
Traveling device  
Forward speed, mph (km/h) 5.2 (8.4) with transports wheels @ 3500 engine rpm
Roller - rear, in. (mm) Aluminum; 7.5 (190) diameter
Roller - front (grooved or smooth), in. (mm) Machined steel, 2.375 (60) diameter (for cutting height adjustment)
Type ANSI B71.4-2004
Sound levels  
Operator ear 79 dB(A)
Measuring standard ISO 11201
Attachments installed Greens Tender™ Conditioner and reel engaged